|
|
 |
 Product
Range
- Container width: Up to 26
inches
- Container length: Up to
32 inches
- Container height: 24 to 3
inches
- Container weight: 100
pounds maximum
- Handles most plastic and
steel containers with grippable handles or
perimeter lip.
Standard
Features
- Two-jaw pneumatic gripper
- Rodless cylinder powered
reach axis
- Urethane belt,
electrically powered bed
- Pneumatic popup stops for
container positioning
- Vertical axis servo
controlled
- Spring-set platform
holding brake
- Path-clear sensors
- Powder coat finish
-
Controls
use UL listed components and are built in UL
certified panel shops.
Optional
Features
- Vacuum cup style gripper
- Allen-Bradley PLC control
- Photo eye air blow-off
for dusty environments
- High temperature
operation
- Low temperature operation
- Larger tray/carton sizes
Specifications
-
 Up
to four transactions per minute
- Platform vertical speed:
120 ft/min
- Platform horizontal
speed: 60 ft/min
- Vertical hoist chain
safety factor: 10
- Bearings: All pillow
block and flange bearings have a B1O life of
25,000 hours, and are a sealed, heavy-duty
design
- Footprint: 24 x 52 inches
- Height: The overall
height of the masts is approximately equal to
the height of the top carousel shelf plus 2 feet
- Storbot carousel
interface: The Storbot 2 is capable of accessing
up to two carousels stacked vertically. The
lowest shelf position is 12 inches from the
floor. The highest shelf position is determined
by the configuration of the carousel bins. The
Storbot can be positioned in-line, or at a 45°
angle with the carousel, depending on
requirements of the inbound and outbound
conveyor. The Storbot 2 features a pass-through
container handling design.
|
|
