Meco Ohoma Cantilever Rack Features

Meco Ohama Cantilever Rack is a freestanding storage unit with horizontal load carrying arms extending outward from a single vertical column. The absence of a vertical support on the outboard ends of the arms permits uninterrupted storage of long lengths of material.

cantilever rack heavydutyshelving usa
Cantilever Rack is the ideal system for storing furniture, steel bars, pipe and tubing, lumber and other long, heavy items that must be kept off the floor provides instant accessibility to one piece or a full load. Forklift easily loads off and on arms and bases. Being modular in nature, additional arms, uprights and braces may be added as storage requirements change.

Meco Omaha manufactures five basic capacity series to fit your storage requirements – from Series 1000 Medium Duty through the Series 5000 Extra Heavy Duty. Available in upright heights from 6' to 20' with 2' through 10' brace widths (measured on center). Arms are completely adjustable on 3" centers to accommodate an infinite variety of items. Straight arms are available in nine different lengths with or without lips. Heavy Duty and Extra Heavy Duty arms are both available in seven lengths with or without lips. Inclined arms are available in seven lengths with or without lips. A wide range of base sizes allows custom designing of rack systems to your individual needs.

Uprights are punched on both sides for versatility and can be used single sided or double sided depending on the size of base used. Note that arms must never be placed on the back side of a single-based upright. MECO OMAHA CANTILEVER RACKS are modular within each basic capacity series so that additional arms, uprights and cross braces may be ordered at any time to add to your existing system. Different sized arms may be interchanged on racks to further tailor your racks to different uses. Standard and Heavy Duty arms (page 24) are designed for use on Series 3000, Series 4000 and Series 5000 uprights only. Series 1000 and Series 2000 components are not interchangeable with any other rack series.

Please provide us with your contact information:

This sheet is an initial contact form to primarily assist you in designing the best possible system available for your facility. Once you fill out the initial information, we may request additional information. It is important that you complete the quick questionnaire as detailed as possible.
We will contact you on the same day of your request or no later than the following work day
Note: We spend a considerable amount of time and energy designing your system quote to your specifications. Please answer the questions as accurately as possible for your best quote.
Please answer this form the best you can and we will contact you on any questions we might have. It only takes a couple minutes and we can get you an exact quote based on your answers.
Name
 Business Name
 Street Address
Address Continued
 City
 State
Zip Code
 Telephone
E-Mail
   
Web Site Address

Cantilever rack is comprised of three components

these components must be ordered in the appropriate quantities and capacities

cantilever components

Sample A: Cantilever Rack Components

Questions about your Cantilever Rack System?

In order to help us provide you with the appropriate grade shelving, please complete our request form. This information will help us price the appropriate equipment you require.

Would you like a cantilever straight arm or an inclined arm?

Please see detail below

heavyduty shelving usa cantilever arm

Straight Arm

Straight arms up to 48" long have minimum pitch of 3/8" per foot to compensate for deflection. 54" and 60" arms have a minimum pitch of 5/8" per foot.

heavyduty shelving usa inclined arm

Inclined Arm

Would you like a cantilever straight arm or an inclined arm? (See above)

 

 

 

What is your requested cantilever straight arm length?

 
What is your requested cantilever  incline arm length?

 
Uprights consist of a vertical column and a horizontal base which is bolted to the column. A minimum of two uprights must be ordered to form a storage bay. Each edge of the column is punched vertically on 3" centers so it may be used as a single or double sided upright depending on the size of base used. NOTE: The arms must never be placed on the back side of a single sided upright and base. Standard upright and base color is gray.
heavyduty shelving usa Single Sided Upright

Single Sided Upright

heavyduty shelving usa Double Sided Upright

Double Sided Upright

Additional information

Please specify additional detailed information that will help us create your custom quote.

Thank you for requesting a Free Quote. We pride ourselves in serving our customers!